‘I Feel’ is an advanced feature designed for your utmost comfort. Other airconditioners have only one temperature sensor on the indoor unit which senses the temperature around the unit and not necessarily near the user, leading to discomfort for the user, especially in larger rooms.

Blue Star’s ‘I Feel’ feature incorporates two temperature sensors, one on the unit and the other on the remote handset. In a large room, you may choose to enable this feature on the remote. The remote, when placed next to you, will then sense the temperature around you and control the airconditioner for your utmost comfort.

In this mode, the indoor blower in a Blue Star AC runs for a few minutes even after the airconditioner is switched off. This helps keep the indoor coil dry and prevents dust or mold accumulation. Also, the growth of bacteria in the indoor coil, due to moisture, is reduced significantly.

Every Blue Star AC uses a highly energy-efficient rotary compressor with a built-in accumulator. This compressor is specially designed to deliver maximum cooling while using less power and helps you save on your power bills.

Since the Evaporator (indoor coil) has a low temperature, it might result in water condensation. This results in accumulation of dust particles, thereby affecting the performance of the AC. The hydrophobicity in the evaporator fins doesn’t allow water condensate to accumulate. This reduces the accumulation of dust particles and improves the cooling performance of the AC.

All Blue Star ACs offer Multi-Fan Speed options to suit your comfort level. The Window ACs come with Three Speed Fan Cooling whereas the Split ACs come with Four Speed Fan Cooling (Low/Medium/High/Auto) that lets you adjust the Fan Speed.

Sleep Mode is an intelligent feature that ensures a comfortable temperature throughout the night. The user sets a particular temperature before sleeping. In the Sleep Mode, this user-set temperature increases for a short period of time. So even if the temperature outside dips later in the night, the user is comfortable and doesn’t feel too cold. The Sleep Mode helps save energy and also adds to the comfort of the user.

Blue Star outdoor units have been built keeping in mind the harsh Indian climatic conditions. The metal bodies of the units use galvanised steel and are coated with polyester powder paint. This protects them from rusting and increases their life significantly.

Fixed and Swing Louvres help the user adjust the swing or even stop it at a particular angle. This adds to the user’s comfort by letting him manage the air flow to suit his needs.

The front panel of the indoor unit can be easily detached for periodic cleaning. This helps in the maintenance of the AC.

Blue Star ACs come with modern-looking, easy-to-use remotes that are packed with features.

In case of faulty conditions, the ACs show error codes. This ensures proper care and protects the ACs from any damage.

This feature controls the swing angle of the Horizontal Louvre. It allows the user to change the air flow direction to avoid direct draft of cold air.

In this mode, the AC switches to High/Turbo Fan Speed to help reach the pre-set temperature in the shortest time possible.

The unit will automatically select the suitable running method according to the room temperature, making the room comfortable. This can be set while in Cooling Mode.

The Dry Mode is useful, especially during monsoon when the room feels humid and clammy. This feature helps remove the moisture from the air rapidly.

This feature adds to your convenience as you can set the timer for On or Off as per requirement.

Covers the PCB board and prevents any overheating of electrical components.

The Wide Angle Louvres ensure that cool air is distributed evenly across the room and that it reaches every corner.

All Split ACs come with an advanced digital display on the indoor unit that helps indicate the mode of operation of the AC.

This feature is very useful in case of a power cut. Thanks to this feature, the airconditioner restarts at the previous setting automatically when the power resumes.

Anti-Corrosive Blue Fins are used in the copper condenser to resist its corrosion thus increasing the AC’s life.

If the unit is running in the Cool Mode and is set at a very low temperature, frost is formed on the heat exchanger. The Anti-Freeze Thermostat on the Indoor Coil acts as a safety feature and stops the compressor, thus protecting the unit.

Every Blue Star AC uses a highly energy-efficient rotary compressor with a built-in accumulator. This compressor is specially designed to deliver maximum cooling while using less power and helps you save on your power bills.

The unit will automatically select the suitable running method according to the room temperature, making the room comfortable. This can be set while in Cooling Mode.

All Blue Star ACs offer Multi-Fan Speed options to suit your comfort level. The Window ACs come with Three Speed Fan Cooling whereas the Split ACs come with Four Speed Fan Cooling (Low/Medium/High/Auto) that lets you adjust the Fan Speed.

The Wide Angle Louvres ensure that cool air is distributed evenly across the room and that it reaches every corner.

Sleep Mode is an intelligent feature that ensures a comfortable temperature throughout the night. The user sets a particular temperature before sleeping. In the Sleep Mode, this user-set temperature increases for a short period of time. So even if the temperature outside dips later in the night, the user is comfortable and doesn’t feel too cold. The Sleep Mode helps save energy and also adds to the comfort of the user.

This feature controls the swing angle of the Horizontal Louvre. It allows the user to change the air flow direction to avoid direct draft of cold air.

Fixed and Swing Louvres help the user adjust the swing or even stop it at a particular angle. This adds to the user’s comfort by letting him manage the air flow to suit his needs.

If the unit is running in the Cool Mode and is set at a very low temperature, frost is formed on the heat exchanger. The Anti-Freeze Thermostat on the Indoor Coil acts as a safety feature and stops the compressor, thus protecting the unit.

Blue Star ACs come with modern-looking, easy-to-use remotes that are packed with features.

This feature adds to your convenience as you can set the timer for On or Off as per requirement.

In this mode, the AC switches to High/Turbo Fan Speed to help reach the pre-set temperature in the shortest time possible.

The front panel of the indoor unit can be easily detached for periodic cleaning. This helps in the maintenance of the AC.

In case of faulty conditions, the ACs show error codes. This ensures proper care and protects the ACs from any damage.

Since the Evaporator (indoor coil) has a low temperature, it might result in water condensation. This results in accumulation of dust particles, thereby affecting the performance of the AC. The hydrophobicity in the evaporator fins doesn’t allow water condensate to accumulate. This reduces the accumulation of dust particles and improves the cooling performance of the AC.

The Dry Mode is useful, especially during monsoon when the room feels humid and clammy. This feature helps remove the moisture from the air rapidly.

This feature is very useful in case of a power cut. Thanks to this feature, the airconditioner restarts at the previous setting automatically when the power resumes.

Covers the PCB board and prevents any overheating of electrical components.

Blue Star outdoor units have been built keeping in mind the harsh Indian climatic conditions. The metal bodies of the units use galvanised steel and are coated with polyester powder paint. This protects them from rusting and increases their life significantly.

In this mode, the indoor blower in a Blue Star AC runs for a few minutes even after the airconditioner is switched off. This helps keep the indoor coil dry and prevents dust or mold accumulation. Also, the growth of bacteria in the indoor coil, due to moisture, is reduced significantly.

Every Blue Star AC uses a highly energy-efficient rotary compressor with a built-in accumulator. This compressor is specially designed to deliver maximum cooling while using less power and helps you save on your power bills.

The unit will automatically select the suitable running method according to the room temperature, making the room comfortable. This can be set while in Cooling Mode.

All Blue Star ACs offer Multi-Fan Speed options to suit your comfort level. The Window ACs come with Three Speed Fan Cooling whereas the Split ACs come with Four Speed Fan Cooling (Low/Medium/High/Auto) that lets you adjust the Fan Speed.

The Wide Angle Louvres ensure that cool air is distributed evenly across the room and that it reaches every corner.

Sleep Mode is an intelligent feature that ensures a comfortable temperature throughout the night. The user sets a particular temperature before sleeping. In the Sleep Mode, this user-set temperature increases for a short period of time. So even if the temperature outside dips later in the night, the user is comfortable and doesn’t feel too cold. The Sleep Mode helps save energy and also adds to the comfort of the user.

This feature controls the swing angle of the Horizontal Louvre. It allows the user to change the air flow direction to avoid direct draft of cold air.

Fixed and Swing Louvres help the user adjust the swing or even stop it at a particular angle. This adds to the user’s comfort by letting him manage the air flow to suit his needs.

If the unit is running in the Cool Mode and is set at a very low temperature, frost is formed on the heat exchanger. The Anti-Freeze Thermostat on the Indoor Coil acts as a safety feature and stops the compressor, thus protecting the unit.

Blue Star ACs come with modern-looking, easy-to-use remotes that are packed with features.

This feature adds to your convenience as you can set the timer for On or Off as per requirement.

The front panel of the indoor unit can be easily detached for periodic cleaning. This helps in the maintenance of the AC.

In case of faulty conditions, the ACs show error codes. This ensures proper care and protects the ACs from any damage.

Since the Evaporator (indoor coil) has a low temperature, it might result in water condensation. This results in accumulation of dust particles, thereby affecting the performance of the AC. The hydrophobicity in the evaporator fins doesn’t allow water condensate to accumulate. This reduces the accumulation of dust particles and improves the cooling performance of the AC.

The Dry Mode is useful, especially during monsoon when the room feels humid and clammy. This feature helps remove the moisture from the air rapidly.

This feature is very useful in case of a power cut. Thanks to this feature, the airconditioner restarts at the previous setting automatically when the power resumes.

Covers the PCB board and prevents any overheating of electrical components.

Blue Star outdoor units have been built keeping in mind the harsh Indian climatic conditions. The metal bodies of the units use galvanised steel and are coated with polyester powder paint. This protects them from rusting and increases their life significantly.

Special Anti-Corrosive Blue Fins are used in the copper condenser to resist its corrosion thus increasing the AC’s life.

Every Blue Star AC uses a highly energy efficient rotary compressor with a built-in accumulator. This compressor is specially designed to deliver maximum cooling while using low power and helps you save on your power bills.

The unit will automatically select the suitable running method according to the room temperature, making the room comfortable. This can be set while in Cooling Mode.

All Blue Star ACs offer Multi-Fan Speed options to suit your comfort level. The Window ACs come with Three Speed Fan Cooling whereas the Split ACs come with Four Speed Fan Cooling (Low/Medium/High/Auto) that lets you adjust the Fan Speed.

The Wide Angle Louvres ensure that cool air is distributed evenly across the room and that it reaches every corner.

Sleep Mode is an intelligent feature that ensures a comfortable temperature throughout the night. The user sets a particular temperature before sleeping. In the Sleep Mode, this user-set temperature increases for a short period of time. So even if the temperature outside dips later in the night, the user is comfortable and doesn’t feel too cold. The Sleep Mode helps save energy and also adds to the comfort of the user.

This feature controls the swing angle of the Horizontal Louvre. It allows the user to change the air flow direction to avoid direct draft of cold air.

Fixed and Swing Louvres help the user adjust the swing or even stop it at a particular angle. This adds to the user’s comfort by letting him manage the air flow to suit his needs.

If the unit is running in the Cool Mode and is set at a very low temperature, frost is formed on the heat exchanger. The Anti-Freeze Thermostat on the Indoor Coil acts as a safety feature and stops the compressor, thus protecting the unit.

Blue Star ACs come with modern-looking, easy-to-use remotes that are packed with features.

This feature adds to your convenience as you can set the timer for On or Off as per requirement.

In this mode, the AC switches to High/Turbo Fan Speed to help reach the pre-set temperature in the shortest time possible.

Special Anti-Corrosive Blue Fins are used in the copper condenser to resist its corrosion thus increasing the AC’s life.

The front panel of the indoor unit can be easily detached for periodic cleaning. This helps in the maintenance of the AC.

In case of faulty conditions, the ACs show error codes. This ensures proper care and protects the ACs from any damage.

Since the Evaporator (indoor coil) has a low temperature, it might result in water condensation. This results in accumulation of dust particles, thereby affecting the performance of the AC. The hydrophobicity in the evaporator fins doesn’t allow water condensate to accumulate. This reduces the accumulation of dust particles and improves the cooling performance of the AC.

The Dry Mode is useful, especially during monsoon when the room feels humid and clammy. This feature helps remove the moisture from the air rapidly.

This feature is very useful in case of a power cut. Thanks to this feature, the airconditioner restarts at the previous setting automatically when the power resumes.

Covers the PCB board and prevents any overheating of electrical components.

Blue Star outdoor units have been built keeping in mind the harsh Indian climatic conditions. The metal bodies of the units use galvanised steel and are coated with polyester powder paint. This protects them from rusting and increases their life significantly.

‘I Feel’ is an advanced feature designed for your utmost comfort. Other airconditioners have only one temperature sensor on the indoor unit, which senses the temperature around the unit and not necessarily near the user, leading to discomfort for the user, especially in larger rooms.

Blue Star’s ‘I Feel’ feature incorporates two temperature sensors, one on the unit and the other on the remote handset. In a large room, you may choose to enable the feature on the remote. The remote, when placed next to you, will then sense the temperature around you and control the airconditioner for your utmost comfort.

In this mode, the indoor blower in a Blue Star AC runs for a few minutes even after the airconditioner is switched off. This helps keep the indoor coil dry and prevents dust or mold accumulation. Also, the growth of bacteria in the indoor coil due to moisture is reduced significantly.

All Split ACs come with an advanced digital display on the indoor unit that helps indicate the mode of operation of the AC.

Every Blue Star AC uses a highly energy-efficient rotary compressor with a built-in accumulator. This compressor is specially designed to deliver maximum cooling while using less power and helps you save on your power bills.

The unit will automatically select the suitable running method according to the room temperature, making the room comfortable. This can be set while in Cooling Mode.

All Blue Star ACs offer Multi-Fan Speed options to suit your comfort level. The Window ACs come with Three Speed Fan Cooling whereas the Split ACs come with Four Speed Fan Cooling (Low/Medium/High/Auto) that lets you adjust the Fan Speed.

The Wide Angle Louvres ensure that cool air is distributed evenly across the room and that it reaches every corner.

Sleep Mode is an intelligent feature that ensures a comfortable temperature throughout the night. The user sets a particular temperature before sleeping. In the Sleep Mode, this user-set temperature increases for a short period of time. So even if the temperature outside dips later in the night, the user is comfortable and doesn’t feel too cold. The Sleep Mode helps save energy and also adds to the comfort of the user.

This feature controls the swing angle of the Horizontal Louvre. It allows the user to change the air flow direction to avoid direct draft of cold air.

Fixed and Swing Louvres help the user adjust the swing or even stop it at a particular angle. This adds to the user’s comfort by letting him manage the air flow to suit his needs.

If the unit is running in the Cool Mode and is set at a very low temperature, frost is formed on the heat exchanger. The Anti-Freeze Thermostat on the Indoor Coil acts as a safety feature and stops the compressor, thus protecting the unit.

Blue Star ACs come with modern-looking, easy-to-use remotes that are packed with features.

This feature adds to your convenience as you can set the timer for On or Off as per requirement.

In this mode, the AC switches to High/Turbo Fan Speed to help reach the pre-set temperature in the shortest time possible.

The front panel of the indoor unit can be easily detached for periodic cleaning. This helps in the maintenance of the AC.

In case of faulty conditions, the ACs show error codes. This ensures proper care and protects the ACs from any damage.

Since the Evaporator (indoor coil) has a low temperature, it might result in water condensation. This results in accumulation of dust particles, thereby affecting the performance of the AC. The hydrophobicity in the evaporator fins doesn’t allow water condensate to accumulate. This reduces the accumulation of dust particles and improves the cooling performance of the AC.

The Dry Mode is useful, especially during monsoon when the room feels humid and clammy. This feature helps remove the moisture from the air rapidly.

This feature is very useful in case of a power cut. Thanks to this feature, the airconditioner restarts at the previous setting automatically when the power resumes.

Covers the PCB board and prevents any overheating of electrical components.

Blue Star outdoor units have been built keeping in mind the harsh Indian climatic conditions. The metal bodies of the units use galvanised steel and are coated with polyester powder paint. This protects them from rusting and increases their life significantly.

‘I Feel’ is an advanced feature designed for your utmost comfort. Other airconditioners have only one temperature sensor on the indoor unit which senses the temperature around the unit and not necessarily near the user, leading to discomfort for the user, especially in larger rooms.

Blue Star’s ‘I Feel’ feature incorporates two temperature sensors, one on the unit and the other on the remote handset. In a large room, you may choose to enable this feature on the remote. The remote, when placed next to you, will then sense the temperature around you and control the airconditioner for your utmost comfort

In this mode, the indoor blower in a Blue Star AC runs for a few minutes even after the airconditioner is switched off. This helps keep the indoor coil dry and prevents dust or mold accumulation. Also, the growth of bacteria in the indoor coil, due to moisture, is reduced significantly.

All Split ACs come with an advanced digital display on the indoor unit that helps indicate the mode of operation of the AC.

Special Anti-Corrosive Blue Fins are used in the copper condenser to resist its corrosion thus increasing the AC’s life.